get plumbing tips

5 Plumbing Tips & Tricks Everyone Should Know

Having issues with your plumbing can be a hassle, especially if you are not knowledgeable on the subject. Professional plumbers are extremely expensive, and often have long wait times. Why not solve the plumbing problem yourself? Keep reading to learn how to easily fix common plumbing problems.

1. Make sure everyone that lives in your house knows where to find and use the main water shut off valve in case there is a burst pipe emergency. This is especially important if you live in an area where your pipes may freeze. Take a moment to show your family members where the valve is and how to properly shut it off.

2. If you have noisy pipes, you can cushion them with a rubber blanket or add additional anchor straps. Banging pipes are usually caused by loose pipes, water hammering to a stop as you turn it off, or hot water pipes shifting in their position. All of these problems can be solved by cushioning and anchoring the pipes.

3. Avoid freezing/bursting pipes due to sudden drops in the temperature. You need to allow the flow of heat to reach under the sinks and into the pipes, you have to keep the cabinet doors of the bathrooms and kitchens open. It is important to keep water running at both hot and cold faucets along with vanities that are in close proximity to exterior walls.

4. Watch how your toilets are flushing. If you have to jiggle the handle or if it takes too long, you might have to repair some toilet parts. Replacing these parts early may help you to save on your water bills and will save you from more expensive repairs at a later date.

5. If water backs up from one sink to another, it is because the lines are connected. The part of the branch line for one device might be higher than another, but most likely there is also a blockage in the branch line connecting the two devices as well. This blockage must be cleaned.

phoenix unclog drain repair

The Importance of Hiring a Professional Plumber

It Is Important To Hire A Professional To Handle Your Plumbing Repairs and Upgrades in Phoenix!

Plumbing does not have to be as complicated as most people make it out to be. There are some basic things that you need to know about plumbing systems, as well as, having the necessary tools to do your own repairs. This article has 4 useful tips and tricks that you can add to your tool belt:

1. Rigid copper is used for main water lines in many homes. You cannot bend rigid copper, so joints and tees must be soldered on. When soldering, always apply flux (also called soldering paste) to both surfaces. Flux retards oxidation when the copper is heated. Always use lead-free or nearly lead-free solder when sweating a copper joint.

2. Before starting any plumbing project be sure to turn off the main water supply. Water damage can be one of the most expensive things to repair. To minimize damage turn the main water supply off as well as any shut off valves near where you are working. This will save a great deal of hardship later on.

3. Before you start a plumbing project you should tighten all of the pipes that are easily accessible. Especially if your pipes are making a range of loud banging sounds, as this is a clear sign that there are loose pipes along the line. It is also a good idea in case there is a clog so the excess pressure released does not break a loose pipe.

4. To winterize a house that will sit unused during the winter months, you must completely drain all of the pipes. After turning off the main water supply, let all of the water drain from the faucets, toilets, and water heater (turn off the gas). Add a quart of antifreeze to sinks and the tub to prevent water from freezing in the drain trap.

Clearing Clogged Sewer Pipes and Drains In The Home

clog removal and drain cleaningInstall screen traps or drain covers on all of your sinks and tub drains. Most home plumbing calls are about clogged pipes. These clogs are usually caused by debris, especially hair, washing down the drains. Putting in a trap means that you can clean this debris out before it ends up stuck in the pipes.

The next time you have a clogged drain, avoid the simple solution of dumping drain-clearing chemicals into the pipes. While this method involves the least amount of effort, the chemicals in these liquid cleaners are destructive to your piping. Instead, consider using a little bit of elbow grease with a plunger, snake, or other device designed to clear your clog without chemicals.

If you have a clogged drain, don’t use cleaning chemicals to try to clear the clog. These harsh chemicals can corrode and dissolve your metal pipes as well as the clog leading to leaks and broken pipes over time. Instead, stick to a plunger if possible or make use of a plumbing snake to clear the obstruction. If time is of the essence, you may want to call us to remove the clog quickly.

DIY Plumbing Conclusion

Plumbing can be a very effective skill to have in your tool belt for whatever needs you may have. You may already know the basics and want to know how to save time and money by doing repairs, yourself. No matter your reasons, hopefully, the tips in this article has given you some ideas.